Dimmer (OTDIM) works perfectly well with Natalie, Grace, LED Ribbonlite and Tara Light Fixtures.
The OTDIM is a specifically designed for controlling LED lighting, although is limited to a maximum of 5 amps current at the operating low voltage. Because UL limits the working voltage of many low voltage lighting systems to 15VDC, the maximum load per OTDIM is 75 watts. The number of OTDIMs controlled by the 10V signal wire pair from the Dimming Control should be limited to the Dimming Control Manufacture Guidelines for fluorescent dimming ballasts.
The OTDIM operates with either sink or source controls (50 ma current limit per OTDIM), or with a 100K linear potentiometer.
The OTDIM has two sets of output terminals for LED lighting load. Where possible, place an equal amount of load on each output.
Please contact the factory to see if compatability with a specific lighting control. Development was done using a Lutron
Nova-T (NTFTV-XX) control and will work as well with many Lutron controls.
Please refer to our dimming guidelines for OTDIM and TLD-75WSO.
